Floor Types

Can You Use a Floor Scrubber on Safety Flooring?

Can you use a floor scrubber on slip-resistant safety vinyl such as Altro, Forbo Safestep, Polyflor Polysafe or Tarkett Safetred? Yes. Brush or pad, machine speed and banned chemicals from six makers' care guides, side by side.

Key takeaways

  • Yes. All six safety flooring makers we checked allow machine scrubbing, and Altro calls an auto scrubbing machine "the best and most cost-effective method of cleaning Altro flooring."
  • Fit a brush, not a soft pad. Forbo says "standard brushes should be used on Safestep R11 and R12," Tarkett asks for a medium brush on Safetred, Gerflor a stiff nylon bristle brush on Tarasafe, and Polyflor replaces the pad with a brush on Polysafe Hydro.
  • The pads that are allowed are specific: Altro's own UniPad or "medium pads," and on Amtico Safety LVT nothing "more abrasive than a red 3M pad." None of the six documents asks for a white or soft pad on a disc scrubber.
  • Keep a disc deck at 180 rpm or less to satisfy every maker that gives a figure: Forbo 150 to 180, Polyflor 165, Amtico 180 or less, Altro 150 to 350.
  • No polish, seal or dressing on any of them, and rinse: residue is what makes a slip-resistant floor slippery. Altro adds no pine oil or phenolic sanitizer; Amtico no soap or washing-up liquid.

Yes. Every safety flooring maker we checked allows a machine, and Altro puts it first: "The best and most cost-effective method of cleaning Altro flooring is with an auto scrubbing machine. Care should be taken to select the correct pad." That last sentence is where most of the trouble starts. On slip-resistant vinyl the right tool is usually a brush, or a pad the floor maker names, not the soft white or red pad that suits smooth vinyl. Forbo says "standard brushes should be used on Safestep R11 and R12," and Tarkett asks for a scrubber-dryer "fitted with a medium brush" on Safetred.

Two answers circulate because safety vinyl is still vinyl. General advice for LVT and sheet vinyl says to use the gentlest pad that works, to protect a thin wear layer. On safety flooring the grit and texture are the surface, and a flat pad rides the high points while soil settles between them (see brush vs pad for the mechanics). Polyflor's care sheet makes the point in its own way: for its Polysafe Hydro ranges, "the scrubbing pad should be replaced with a rotary scrubbing brush or a cylindrical type scrubbing machine." Altro's UniPad, which Altro describes as "non abrasive," is the other source of the soft-pad idea. It is a pad Altro "specifically developed" for resilient safety flooring, not a generic polishing pad.

What six safety flooring makers allow

We read the care document for each maker's main slip-resistant range and copied the machine, brush or pad, speed and chemical rules as written.

DocumentMachine namedBrush or padSpeedRoutine cleanerNever use
Altro, cleaning guide for safety and slip-resistant floors (US, 2023): Stronghold 30, Classic 25, Atlas 40, Aquarius, Walkway 20, XpressLay and others"Auto scrubbing machine"; "automatic scrubber (3 in 1 machine)" or swing machineAltro UniPad; APAC guide: "Altro UniPad or medium pads"Swing machine 150 to 350 rpmAltroClean 44, an alkaline cleaner: 1:40 moderate soil, 1:10 heavy"Cleaner containing pine oil or phenolic sanitizer"
Amtico, Safety LVT maintenance guidelines (ASF-MA-20260706-07): Signature, Décor, Spacia and Marine SafetyScrubber dryer"No more abrasive than a red 3M pad," or brush attachment"No higher than 180rpm"Amtico Maintainer at label dilutionFloor dressings, soap or washing-up liquid, spray or dry buffing
Forbo, Safestep R11, R12 and Aqua floorcareScrubber drier, rotary machine, or cylindrical brush machineStandard brushes on R11 and R12; soft brushes on Aqua150 to 180 rpmNeutral (Forbo Cleaner or Monel)Seals, polishes, polish maintainers, abrasive powders; highly alkaline products (ammonia, soda) and acetone for stains
Polyflor, floorcare for Polysafe ranges (Ecomax, Strata, Ultima, Apex, Hydro, Hydro Evolve; product sheets 2012 and 2014)Rotary machine plus wet vacuum; cylindrical machine on HydroRotary scrubbing brush, pad "if necessary"; Hydro and Hydro Evolve brush only165 rpmNeutral or alkaline cleanserFloor dressing or maintainer containing polish
Tarkett, Safetred maintenance instructions (March 2012): Dimension, Universal, Universal Plus, Spectrum PUContra-rotating cylindrical machine, rotary scrubber, or "scrubber-dryer standard speed machine"Medium brush"Standard speed"Neutral pH 7 (Carefree Stride 1000); Stride 2000 for heavy or greasy soilPolish or maintainers
Gerflor, Tarasafe maintenance (May 2010): Ultra, Style, Ultra Comfort, Uni"Hand or machine scrubbed"Stiff nylon bristle brushNot statedNeutral in hot water; alkaline for kitchensSeals or polishes

Six makers, six yeses. Five of them name a brush, and three (Forbo, Polyflor, Tarkett) name a cylindrical brush machine as well. The pads that appear are narrow: Altro's own UniPad or a medium pad, Polyflor's pad only "if necessary" and never on Hydro, and Amtico's red pad as the most abrasive allowed. A white pad shows up once, on a hand-held Doodlebug or deck scrubber in Amtico's deep clean, not on a scrubber dryer. Nobody asks for a grit brush either.

Brush or pad: the answer for your floor

  • Forbo Safestep R11 or R12: standard (not soft) brush on a disc scrubber, or a cylindrical brush machine.
  • Forbo Safestep Aqua: soft brush. This is the only document that asks for soft anything, and only on this product.
  • Tarkett Safetred: medium brush, disc or cylindrical.
  • Gerflor Tarasafe: stiff nylon bristle brush.
  • Polyflor Polysafe Hydro and Hydro Evolve: brush or cylindrical machine, no pad.
  • Other Polysafe ranges: brush first, pad only if needed.
  • Altro: Altro UniPad (13, 15, 16 and 17 in machine sizes) or a medium pad. If you change to a brush, ask Altro Technical Services first; the guide names a pad.
  • Amtico Safety LVT: red 3M pad or a brush attachment, nothing more abrasive.

If you do not know which product you have, a standard or medium brush at low speed fits more of these documents than any pad does. Our brushes and pads guide explains bristle types.

Speed: 180 rpm covers every maker that sets a limit

The figures cluster low. Forbo recommends 150 to 180 rpm "for machine cleaning and maintenance," Polyflor specifies a 165 rpm rotary machine, Amtico says scrubber dryers should "be of a speed no higher than 180rpm," and Altro allows a swing machine from 150 to 350 rpm. A disc deck at or under 180 rpm meets all four. Disc scrubbers typically turn somewhere around 150 to 300 rpm, so check the brush speed in your machine's specification before assuming it fits Forbo or Amtico.

Cylindrical decks are a separate case. They spin far faster than any of these figures (see disc vs cylindrical), yet Forbo, Polyflor and Tarkett name cylindrical brush machines as approved alongside their rpm figure, so the rpm limit reads as a disc speed. Amtico is the exception: "only scrubber dryer machines of 180 rpm or less should be used" for deep cleaning, with no carve-out for cylindrical brushes. On Amtico, stay with a disc deck.

Amtico also says the floor "should never be spray or dry buffed at any time" and that high-speed buffing machines "will compromise the performance and appearance of the floor." A burnisher has no place on any of these floors, because there is no finish to burnish.

Chemistry: neutral is not the rule, rinsing is

A common belief is that safety flooring takes neutral cleaner only. The makers split. Forbo and Tarkett set neutral as the routine, Forbo's stain advice rules out "highly alkaline products (ammonia, soda)," and Tarkett names a pH 7 detergent. Altro goes the other way: its routine cleaner, AltroClean 44, is described in its APAC guide as an "alkaline cleaner," mixed 1:40 for moderate soil and 1:10 for heavy. Polyflor allows "neutral or alkaline cleanser," and Gerflor uses an alkaline cleaner in kitchens. Tarkett adds an acid cleaner at pH 2 to 4 for limescale in wet areas, rinsed off. Amtico deep cleans every six months to a year with a solution of Amtico Stripper.

What they agree on is residue. Altro: "No cleaning residue should remain on the floor." Amtico: do not use products "at too high a concentration as this may leave a surface residue," and soap or washing-up liquid "may leave hard-to-remove film or residue" that "may be slippery." Forbo: "Overuse or inadequate rinsing of cleaning chemicals may compromise the performance of the floor." Every maker ends its machine procedure by picking up the dirty water, and five of the six add a clean water rinse. The slip resistance guide covers the residue test and why a film on a textured floor cuts traction.

The specific bans are short and worth posting in the janitor's closet:

  • Polish, seal, dressing or "maintainer" with polish: banned by all six. Altro's APAC guide allows polish only "where Altro safety flooring is not required to provide maximum slip resistance" and says it "will reduce slip resistance."
  • Pine oil and phenolic sanitizer: Altro.
  • Soap and washing-up liquid: Amtico.
  • Abrasive powders or cleansers: Forbo. Altro's APAC guide, by contrast, suggests scouring powder by hand for heel marks, so this one is maker by maker.
  • Ammonia, soda and strong solvents such as acetone: Forbo, in its stain advice.

Disinfectants are not banned by name in any of the six, apart from Altro's phenolic sanitizer. Polyflor lists germicidal cleansers among its approved products. In a hospital, the healthcare guide explains why a disinfectant needs its label contact time, which a normal scrubber pass does not give.

How to auto scrub safety vinyl

This procedure combines the steps the six documents share, set up for a walk-behind or ride-on scrubber.

  1. Wait out the adhesive on a new floor. Gerflor: 24 hours. Altro: "generally 72 hours." Forbo: no wet cleaning within 3 days. Tarkett: at least 5 days. Our new vinyl floor waiting times set these beside the LVT and VCT makers.
  2. Sweep or vacuum first. Every maker starts with dry soil removal.
  3. Fit the brush or pad from the list above and set the disc speed at 180 rpm or less if your machine allows.
  4. Mix the maker's cleaner at label dilution. Measure it. Overdosing is the residue problem in a bottle.
  5. Give heavy soil dwell time. Altro leaves the solution five minutes, Forbo "a few minutes," and Amtico 10 to 15 minutes in a deep clean with the "vacuum turned off." On an auto scrubber that is a double scrub: first pass with the squeegee up, wait, then scrub again and recover.
  6. Rinse with clean water in the tank on a second pass. Tarkett and Polyflor ask for warm or hot water.
  7. Let the floor dry before traffic.

Tarkett says that on commercial to heavy commercial Safetred floors, "mechanical maintenance is considered essential on a regular ongoing basis."

Where this answer stops applying

  • Other products from the same makers. These rules are for safety ranges. Smooth vinyl, linoleum and transport floors from the same companies have their own guides; our linoleum guide covers Forbo's Marmoleum.
  • Older documents. Tarkett's Safetred sheet is from 2012 and Gerflor's Tarasafe sheet from 2010. Amtico's is from July 2026. Ask for the current version when a floor is under warranty.
  • Static dissipative safety floors. Altro asks for a neutral cleaner on Walkway 20 SD and warns that "aggressive cleaning or the use of polishes may affect the static dissipative properties."
  • Neglected floors. Altro sends "areas requiring renovation due to neglect or heavy soiling" to its Technical Services rather than to a harsher pad.

Frequently asked questions

What pad should I use on Altro flooring?

Altro names its own Altro UniPad for both automatic scrubbers and swing machines, and its APAC guide allows "medium pads." Altro calls the UniPad non abrasive when used with cleaning fluid or water.

Can I use a soft pad on slip-resistant vinyl?

None of the six maker documents asks for one on a scrubber. Forbo says standard brushes, not soft, on Safestep R11 and R12, and Polyflor replaces the pad with a brush on Polysafe Hydro.

What rpm should a scrubber run on safety flooring?

180 rpm or less on a disc deck meets every maker that gives a figure: Forbo 150 to 180, Polyflor 165, Amtico 180 or less, and Altro 150 to 350.

Can you polish safety flooring?

No. All six rule out polish, seals or dressings on their safety ranges, and Forbo, Polyflor, Tarkett and Amtico say it would reduce, impair or compromise the floor's performance. Altro allows polish only where maximum slip resistance is not needed, and says it reduces slip resistance.

Sources

  • Altro, Cleaning guide for safety and slip-resistant floors (US, 2023): altro.com
  • Altro, Recommended cleaning methods, Altro safety flooring (APAC, January 2023): altro.com
  • Altro, Altro UniPad technical data sheet (March 2020): altro.com
  • Amtico, Safety LVT Maintenance Guidelines (ASF-MA-20260706-07-EN): media.amtico.com
  • Forbo Flooring, Floor Care: Safestep R11, Safestep R12, Safestep Aqua, copy hosted by Saltash Town Council: saltash.gov.uk
  • Polyflor, Floorcare for Polysafe ranges Ecomax, Strata, Ultima, Hydro and Hydro Evolve (product sheet January 2012), via SpecifiedBy: specifiedby.com
  • Polyflor, Floorcare for Polysafe ranges including Apex (product sheet July 2014), via EBOSS: eboss.co.nz
  • Tarkett, Safetred maintenance instructions (March 2012), via EBOSS: eboss.co.nz
  • Gerflor, Tarasafe ranges maintenance (May 2010), via SpecifiedBy: specifiedby.com