Floor Types

Can You Use an Auto Scrubber on Linoleum (Marmoleum)?

Can you use an auto scrubber on linoleum or Marmoleum? Yes. The cleaner pH, pad colors, machine speed and stripper rules from Forbo, Armstrong, Tarkett and Gerflor care guides, side by side.

Key takeaways

  • Yes. Every linoleum maker we checked names an automatic scrubber or scrubber drier as an approved way to clean its floors.
  • Forbo's US guide for Marmoleum sets the tightest limit: "The pH of the cleaner in solution must be between 6 – 8 pH," with a 3M Red 5100 pad for light soil, TopLine 5000 for medium and Blue 5300 for heavy.
  • Forbo, Armstrong and Gerflor all say not to strip in the vinyl way. Armstrong caps any solution used on linoleum at pH 10 and excludes its own vinyl stripper and alkaline vinyl cleaner from linoleum.
  • The makers do not agree on alkaline deep cleaning: Tarkett allows pH 10 to 11 and Gerflor an alkaline detergent, both rinsed off, while Forbo says linoleum "should never be cleaned with high pH chemicals." On Marmoleum, follow Forbo.
  • Do not flood the floor, wait four (Armstrong) or five (Forbo) days after installation before wet cleaning, and keep wax and polish off conductive and static dissipative linoleum unless the maker approves the product.

Yes. Forbo's floor care guidelines for Marmoleum say the cleaning solution "can be applied with either a mop and bucket or an automatic scrubber" and tell you to scrub "with a rotary scrubber or automatic scrubber using a 3M Red Buffer Pad #5100 or equivalent." The conditions are the cleaner and the water, not the machine: "The pH of the cleaner in solution must be between 6 – 8 pH," and "Do NOT flood the floor." Armstrong, Tarkett and Gerflor also name a scrubber or combined machine in their linoleum care guides.

The damage people worry about is real, but it comes from treating linoleum like vinyl. Vinyl composition tile is routinely stripped with high-pH chemicals and refinished, and the same machine, the same pad colors and often the same janitorial closet serve both floors. Armstrong notes that linoleum is "made primarily of natural raw materials (linseed oil, cork, jute and natural resins)," and Forbo warns that high pH cleaners and strippers can cause "cracking, shrinking, and/or discoloration." Armstrong's commercial guide makes the point in its first section: "Rubber or linoleum could be confused with vinyl."

What four linoleum makers allow: six documents

We read the current or most recent commercial care document from each maker and copied the machine, pad and chemical rules as written.

DocumentMachine namedRoutine cleanerStrongest chemical allowedPadsSpeed
Forbo, Marmoleum Sheet and Tile with Topshield2 (US, v2.20, 10/13)"Rotary scrubber or automatic scrubber"Neutral, "between 6 – 8 pH" in solutionSame: 6 to 8. No traditional wet stripping3M Red 5100 light, TopLine 5000 medium, Blue 5300 heavySpray buff with a 175 rpm machine
Forbo, linoleum cleaning and maintenance advice (general)"Rotary machine (150-300 rpm) or scrubber drier with red pad"Neutral universal floor cleaner"Linoleum flooring should never be cleaned with high pH chemicals"Red; green for heavily soiled areas150 to 300 rpm cleaning, 300 to 500 rpm spray method
Armstrong, commercial resilient maintenance (F-8663-111, 2011): Marmorette, Granette, Colorette, Linorette, Uni WaltonFloor machine, "or equivalent brushes"Neutral, pH 6 to 8 (S-485)Any solution "10 pH or less," including stripperRed light scrub, blue or green deep scrub; never brown or black175 to 600 rpm spray buff, 300 rpm or less stripping
Armstrong, S-330 Once 'n Done cleaner use and careNot addressedNot a neutral cleaner: "instead alkaline""Do Not Use For: Linoleum, wood or cork"Not addressedNot addressed
Tarkett, Linoleum xf2 care recommendation (Veneto, Etrusco, Style Elle and others, February 2017)"Combined scrubber/dryer with brushes or red pads"; "Combined machine (for large areas)"Diluted neutral detergent"Fairly strong, pH 10-11, after dilution," single disc, rinsedRed or brown "usually most suitable"Low, 150 to 250 rpm "or higher"; dry buff 500 to 1,000 rpm
Gerflor, Cleaning Neocare treated floors (130V3, December 2025): DLW Marmorette, Colorette, LinoArt, Uni Walton"Auto scrubber, rotary cleaner or single-brush machine"Water, or neutral detergent below pH 9Alkaline detergent (pH 9 or above), rinsed with clean waterRed or light green; blue on first use if soiled; melamine disc with water150 to 300 rpm

Four makers, four yeses for machine scrubbing. The differences are in the chemistry. Forbo's US document is the only one that sets a hard 6 to 8 window for every step, including heavy soil. Armstrong lets any maintenance solution go up to pH 10. Tarkett and Gerflor allow a stronger alkaline deep clean, but only as a periodic step with rinsing, not in the daily scrubber tank. No maker allows a vinyl floor stripper as sold, and none of the six documents suggests that an auto scrubber itself is the problem.

Why the alkaline rules differ

Each maker's surface treatment is different, and each guide is written for its own. Forbo's Topshield2 is described as a finish that "should not be removed," and the US guide warns that Marmoleum "can be damaged by traditional wet stripping methods." Gerflor's Neocare and Tarkett's xf2 are factory treatments too; Tarkett says "xf2 will be not removed by any cleaning operation." Even Gerflor, which allows alkaline deep cleaning, says to "never use black discs, chemical strippers, dry polishing, buffing, sealing or other processes that may damage the Neocare surface treatment" on first cleaning.

So the rule that works across all four is the strictest one: neutral cleaner in the tank every day, and a stronger cleaner only if your floor maker's document names it. On Marmoleum, that document is Forbo's, and Forbo's answer is pH 6 to 8 with no exceptions.

The vinyl habits that damage linoleum

Armstrong's own product chart shows the trap. Its S-485 neutral cleaner is listed for vinyl and linoleum alike. Its S-330 Once 'n Done cleaner, sold for vinyl, "is NOT a 'dilute neutral solution' but is instead alkaline," and its label says "Do Not Use For: Linoleum." Its S-490 Commercial Floor Stripper, made for vinyl that carries polish, says "DO NOT USE FOR: Linoleum." Armstrong defines strippers in general as "highly alkaline (pH ≥10)." A crew that strips and refinishes VCT on a cycle, or that uses one general-purpose cleaner across a building, is using exactly the products Armstrong keeps off linoleum.

  • Stripping a factory-finished linoleum floor. Forbo: "Removal of Topshield2 is NOT recommended" and Marmoleum "should NEVER be subjected to traditional, aggressive wet stripping." If it has already been stripped, Forbo asks you to contact its Technical Services. Our stripping guide also notes that Betco Extreme and Diversey Floor Science strippers are not recommended for linoleum.
  • An alkaline general-purpose cleaner in the tank. That is a pH 8 to 10 product on our floor cleaner pH guide scale, above Forbo's 6 to 8. Check the pH of the use solution, not the concentrate: Forbo's limit is for "the cleaner in solution."
  • Brown and black pads. Armstrong rules them out on all its resilient flooring, and Gerflor names black discs. Tarkett is the outlier and lists red or brown as usually most suitable for its combined machine, so a brown pad is acceptable on Tarkett linoleum only.
  • Wet cleaning too soon. Forbo asks for "a minimum of five days following the installation" before initial or wet cleaning, longer over non-porous substrates. Armstrong says not to "wet wash, machine scrub, or strip the floor for at least four days." The reason given in both is the adhesive, not the surface. Our guide to how long to wait before scrubbing a new floor compares these with the vinyl makers' waits.
  • Flooding. Forbo: "Do NOT flood the floor." Armstrong: "Do not use excessive amounts of liquid during maintenance." Tarkett says a damp-mopped floor "should be virtually dry after 15-20 seconds."

How to auto scrub Marmoleum: Forbo's procedure

These steps follow Forbo's US guidelines for interim cleaning, adapted to a walk-behind or ride-on scrubber. Forbo's routine cleaning is done "a minimum of once a day."

  1. Dust mop, sweep or vacuum first. Forbo puts sand and grit removal ahead of every wet step. Grit under a pad is the main scratch risk on any resilient floor.
  2. Mix a neutral cleaner at label dilution. Forbo lists Forbo Neutral pH Cleaner, ProLink Level 7, Spartan Damp Mop, 3M Neutral Cleaner 3H and Diversey Stride. Any other product must test between pH 6 and 8 in solution. Our neutral cleaners guide covers what separates a true neutral from a mildly alkaline product.
  3. Fit the pad for the soil. 3M Red Buffer Pad 5100 for light soil, 3M TopLine Autoscrubber Pad 5000 for medium, 3M Blue Cleaner Pad 5300 for heavy. Forbo also accepts "equivalent" pads. Our brushes and pads guide explains the pad color convention and why shades vary between makers.
  4. Run low solution flow. The rule is not to flood. Start at the lowest solution flow setting that keeps the pad wet and recover the water in the same pass.
  5. Rinse. Forbo's procedure ends with "clean, cool water," picked up "with wet vacuum or automatic scrubber." A second pass with plain water in the tank does this.
  6. Let the floor dry before traffic.
  7. Optional gloss steps. Spray buff with a 175 rpm swing machine and a red pad, apply a mop-on restorer and burnish with a 3M TopLine Speed Burnish 3200 pad, or dry buff with a 3M Eraser 3600 pad. If the floor needs restoration beyond this, Forbo says to contact its Technical Services rather than strip.

Deck speed

The rpm figures in the table were written for disc machines. Disc scrubbers typically turn at roughly 150 to 300 rpm (see disc vs cylindrical), which sits inside Forbo's and Gerflor's 150 to 300 rpm range and mostly inside Tarkett's low setting. Cylindrical decks spin much faster; none of the six documents addresses them, though Armstrong and Tarkett accept brushes in general.

Cement dust after installation

Two makers allow the acid side of the scale for this one job. Forbo's general guide says to add "approximately 2% of Citric or Acetic acid" if cement dust is present at the initial clean, and Tarkett's initial site clean calls for detergent "with a low pH (3-5)." That is an initial cleaning step only, not a routine.

Polish, conductive and slip-resistant linoleum

Polish. Forbo says its linoleum does not need polish, but applying it "will not harm it or affect any product warranties"; just "do not attempt to remove the surface finish." Armstrong offers a polish option for its linoleum, and stripping that polish later must use a stripper made "for use on linoleum (10 pH or less)," scrubbed at 300 rpm or less with a blue pad. If you inherit a polished linoleum floor, that is the only stripping any of the documents allows.

Conductive and static dissipative. Forbo's general guide says Marmoleum Ohmex keeps its conductivity only if it is "cleaned only by cleaning and maintenance products that do not reduce the conductivity of the flooring." Tarkett, for Linoleum xf2 SD and Conductive: "Do not treat the flooring with wax or polish!" because it "may change the products conductive behaviour." On these floors, plain water or the maker's listed cleaner is the safe choice, and the polish options above do not apply.

Slip-resistant linoleum. Tarkett says to never apply polish or wax to Linoleum Sicuro xf2 R10, "as these will affect the slip resistant properties," and to never dry buff it. See slip resistance for why residue on a textured floor matters.

Disinfectants

Gerflor allows alternating a neutral detergent with "an appropriate desinfecting detergent" where disinfection is essential, and lists Anios Surfanios Premium among its recommended products. The pH and residue rules above still apply, and bleach is a separate question: the Clorox label quoted in our bleach and disinfectant guide says "Do not use on cork or linoleum."

Where this answer stops applying

  • Vinyl that looks like linoleum. Many sheet floors called "lino" are vinyl. Our LVT and vinyl guide covers those. Check the product name or the installation records; Marmoleum, Marmorette, Veneto, Colorette and Uni Walton are linoleum.
  • Other linoleum products. Each maker publishes its own care guide, and the products and treatments change. Gerflor's document is dated December 2025, but Forbo's US guide is version 2.20 from 2013 and Armstrong's guide is from 2011. Ask the maker for the current version when the floor is under warranty.
  • Cork floors. Linoleum is made partly from cork, but a cork floor is not linoleum. Cork tile and plank makers ask for a damp mop rather than a scrubber, as our cork flooring guide shows.
  • Restoration. Worn, scratched or previously stripped floors fall outside routine scrubbing. Forbo and Gerflor both ask you to contact them before changing the cleaning method.

Frequently asked questions

What pH cleaner is safe for Marmoleum?

Between pH 6 and 8 in solution, according to Forbo's US floor care guidelines. That applies to initial, routine and interim cleaning, and Forbo's general guide adds that linoleum "should never be cleaned with high pH chemicals."

What pad should I use on linoleum with an auto scrubber?

A red pad for routine cleaning. Forbo allows 3M TopLine 5000 for medium soil and Blue 5300 for heavy soil; Armstrong allows blue or green for a deep scrub and bans brown and black; Gerflor uses red or light green.

Can you strip linoleum floors?

Not a factory-finished Marmoleum floor, according to Forbo. Armstrong allows stripping polish off its linoleum only with a stripper of pH 10 or less, and excludes its own vinyl stripper. Never use a standard vinyl stripper.

Is linoleum cleaned the same way as vinyl?

The machine and pad are similar; the chemistry is not. Vinyl tolerates the alkaline cleaners and strippers that linoleum makers rule out, which is the most common cause of linoleum damage in mixed buildings.

Sources

  • Forbo Flooring Systems, Floor Care Guidelines for Forbo Marmoleum Sheet and Tile with Topshield2 (v2.20, 10/13), copy hosted by a Forbo retailer: greengoodsusa.com
  • Forbo, Cleaning and Maintenance advice (linoleum floorcare, general), copy hosted by a Forbo retailer: greengoodsusa.com
  • Armstrong, Maintenance Recommendations and Procedures for Commercial Resilient Flooring (F-8663-111, 2011), Home Depot document library: homedepot-static.com
  • Armstrong, S-330 Once 'n Done Resilient and Ceramic Floor Cleaner Use and Care, Lowe's document library: pdf.lowes.com
  • Tarkett, Linoleum Floors Care Recommendation, Linoleum xf2 (February 2017): tarkett.com.br
  • Gerflor, Cleaning Neocare treated floors, Marmorette, Colorette, LinoArt, Uni Walton, Acoustic (130V3, December 2025): gerflor.com