Industries

Can You Use a Floor Scrubber in a Cleanroom?

Can you use a floor scrubber in a cleanroom? Yes in ISO Class 7 and 8, and down to Class 5 with a machine built for it: H13 or ULPA exhaust filter, grounding strap, controlled drain. The facility approves it from particle counts.

Key takeaways

  • Yes in ISO Class 7 and 8 rooms, and down to ISO Class 5 with a machine built for cleanrooms. The Canadian Space Agency's ISO 7 test lab scrubs its floors twice a week with an Advance SC1500 stand-on scrubber.
  • The problem with an ordinary scrubber is its exhaust. The vacuum motor pulls air out of the dirty water tank and blows it back into the room. A cleanroom model puts an H13 HEPA or ULPA filter on that exhaust.
  • The other two features are grounding and drains. IP Gansow ties the machine body to the floor with an antistatic strap, and Mikroclean fits shut-off valves to both drain hoses.
  • Nobody but the facility can approve the machine. CHEManager (2012) says the operator decides, usually from particle counts taken before, during and after the machine runs in that room.
  • We found no scrubber-dryer rated for ISO Class 4 or cleaner. For ISO 1 to 3 the published advice is hand cleaning, and Mikroclean does not recommend its machine where microbes are the concern.

Yes, in ISO Class 7 and 8 rooms, and down to ISO Class 5 with a machine built for cleanrooms. The Canadian Space Agency keeps its David Florida Laboratory test halls at ISO Class 7. Its cleaning contract names "an Advance SC1500 stand on scrubber with a 20 inch cleaning path" for that area, with resilient floors scrubbed "twice weekly (Monday and Thursday), using automatic scrubber." Cleaner rooms need a cleanroom model. IP Gansow sells its Reinraum scrubbers for use from ISO Class 5, with an H13 HEPA filter on the vacuum exhaust. ISO 8 allows ten times more particles than ISO 7, so it is the easier case. In every case the facility makes the final call, from particle counts taken in the room.

What a cleanroom is

A cleanroom is a room where the number of airborne particles is held under a set limit. ISO 14644-1 sorts cleanrooms into classes from ISO 1 to ISO 9. The smaller the number, the cleaner the air. Each step down allows ten times fewer particles. At the particle size most people quote, 0.5 micrometers (µm) and larger, the limits per cubic meter of air are:

ISO classMax particles 0.5 µm and larger per m³Old U.S. name (FED-STD-209E)
ISO 53,520Class 100
ISO 635,200Class 1,000
ISO 7352,000Class 10,000
ISO 83,520,000Class 100,000

The Canadian Space Agency writes its ISO 7 limit as 10,000 particles of 0.5 µm and larger per cubic foot. A cubic meter holds about 35.3 cubic feet, so that is about 353,000 per cubic meter. It matches the ISO 7 row.

A floor scrubber, or scrubber-dryer, puts down cleaning solution and scrubs with a pad or brush. It then sucks the dirty water back up in the same pass. That last step is the one that matters here. A vacuum motor pulls air through the dirty water tank to lift the water off the floor. That air then leaves the machine through an exhaust port, back into the room.

A HEPA filter is graded under the European standard EN 1822. Class H13 removes at least 99.95 percent of particles at the size that slips through most easily. An ULPA filter goes further: class U15 removes at least 99.9995 percent. ESD means electrostatic discharge, the static spark that damages electronics. An ESD-safe machine drains static to the floor instead of building it up.

Why two answers circulate

Many cleanroom managers assume floors must be mopped by hand. CHEManager's 2012 article on machines in cleanrooms explains why. It found that almost everything published on cleanroom floor cleaning dealt with the very cleanest rooms, ISO 1 to 3. Those rooms are small and very sensitive, so writers "rightly" described only manual cleaning. The published advice is almost all about hand cleaning, even though most cleanrooms are far less strict.

The other answer is that a scrubber is just a sealed machine, so it is fine. In August 2025, the lab operations manager of the University of Pennsylvania's nanofabrication facility asked the labnetwork mailing list: "is there any downside to using that machine in a cleanroom setting?" The floor maker lists such a machine with a "red pad" and a special cleaner as one recommended method. The motor "is fully sealed," the post noted, so particles did not seem a concern.

Both answers miss the same point. A sealed motor is not the risk. The vacuum exhaust is, along with static and the drain hoses. And the machine in the post was a 17 in, 175 rpm single-disc floor machine with no vacuum and no tank. It scrubs but does not pick up water. The answer for that machine and the answer for a scrubber-dryer are different. A Wake Forest physics professor replied that the lab uses an Oreck Commercial Orbiter with "cleanroom compatible pads." The reply says particle counts taken during cleaning and settle-down were "pretty sensitive" to the soap-to-water ratio and the machine's speed. Our orbital floor scrubbers guide explains how an orbital head differs from a spinning disc.

The exhaust is the problem

Look at an ordinary scrubber's manual. The IPC CT15 to CT46 manual says the machine dries the floor "by means of the low pressure generated in the dirty water tank by the suction motor." Its routine upkeep lists a float switch in the dirty water tank and a filter in the detergent tank. It names no filter on the suction motor's exhaust. The float protects the motor from water, as our recovery tank and float guide explains. It does nothing for the air.

CHEManager (2012) states the rule plainly. A machine for cleanrooms "must in any case" have a suspended-particle filter on the turbine exhaust. Battery or mains power makes no difference. IP Gansow's brochure says why. Its exhaust passes through an H13 HEPATEX filter. So the dirt particles sucked into the dirty water tank "are not released unfiltered" into the surroundings.

Can you add a filter to the machine you own? CHEManager says a retrofit is possible in theory. It also says the technical work and time make it not economically justifiable.

What cleanroom scrubbers add

Three makers and one cleaning firm describe their machines in print:

MachineRated forExhaust filterStaticOther
IP Gansow Reinraum 41 BF 57 and 41 BF 68"From ISO Class 5"H13 HEPATEXBody tied to the floor by an antistatic strap; wrist grounding on the handleStainless steel covers and handle; 570 or 680 mm scrub width; 40 L tank
Mikroclean scrubber (CHEManager and reinraum.de, 2015)Cleanrooms with particle soil, cleaned dailyHEPA H13 to EN 1822, 0.05 percent penetrationConductive materials; all moving parts tied to the chassis; chassis grounded through a strap on the floorStainless steel body and tanks; shut-off valves on both drain hoses
i-team SAFE-T-IMOP (upright scrubber-dryer)ISO Class 5 to 6ULPA 15Not statedBattery powered, no trailing cable
i-team SAFE-T-BOT 45 (robot scrubber-dryer)ISO Class 5ULPA 15Not statedBattery powered

The ISO ratings are the makers' own. Cleanroom Technology reported that i-team's exhaust output is "certified" to ISO classes, but the article does not name who tested it. i-team's ISO Class 4 to 5 product is a vacuum cleaner, not a scrubber.

Why the static features matter: CHEManager says a machine made of ordinary plastic can pull particles toward itself by static. When the charge suddenly discharges, it throws them off again, and the particle count can jump at once. That is why the casing has to be conductive plastic or metal. If your cleanroom also has an ESD floor, the cleaner you use matters too. Our ESD floors guide covers how cleaner residue raises floor resistance.

The drain is the last point. Mikroclean notes that a normal scrubber empties its two tanks through hoses with no control. In a cleanroom that risks putting dirty water back on the floor. So Mikroclean fits a shut-off valve to each hose.

Who approves the machine

Not the maker. CHEManager (2012) says whether a cleaning machine may be used in a cleanroom "is always and exclusively decided by the operator." It says the check is usually two things. First, a review of the protective features built into the machine. Second, particle counts taken before, during and after the machine runs in that room.

The same article sets one more rule. If the machine leaves the cleanroom for repair, it must be decontaminated before it comes back in.

Fraunhofer IPA's TESTED DEVICE program tests equipment for cleanroom suitability. We found no TESTED DEVICE certificate for any scrubber-dryer, so we cite none. The IEST recommended practice on cleanroom cleaning is IEST-RP-CC018. It is sold, not published free, so we have not read it and do not quote it.

Worked example: an ISO 7 assembly hall

Take an ISO 7 hall of about 1,000 m² (10,800 sq ft) with resilient flooring and large open aisles. Suppose the crew mops it every day by hand. Walk it through the checks.

  1. Size. Timo Speck, Mikroclean's managing director, says a machine pays off from about 800 to 1,000 m² of floor cleaned daily. At about 1,000 m² Speck puts the saving at 2.5 to 3 hours a day. This hall sits at the top of that range.
  2. Open floor. The machine only reaches open floor. Under benches, around tools and along the walls is still mopped by hand. The Space Agency contract does the same: baseboards and corners by mop. It also says "DO NOT damp mop around sensitive equipment." If half the floor is under benches, the case for a machine shrinks.
  3. Machine. ISO 7 is where the Space Agency runs an ordinary stand-on scrubber. A purpose-built machine with an H13 exhaust filter and a grounding strap is the safer choice. If the product or the floor is ESD-sensitive, the strap is a must.
  4. Chemistry. Mix the floor maker's approved cleaner at the label rate. Our dilution ratios guide shows how to measure it. The Wake Forest reply is the reason: particle counts moved with the soap-to-water ratio.
  5. Trial. Arrange particle counts with the facility's contamination control staff. Take them before the run, during it and after the settle-down period. Compare them with the room's ISO 7 limit and its usual readings.
  6. Decision. The facility signs off, or not. Suppose the counts climb during the run. The Wake Forest reply points to the machine's speed and the cleaner mix as the first things to change.

Now change one fact. Suppose the hall is ISO 5, not ISO 7. The limit is 100 times tighter, 3,520 particles per m³ instead of 352,000. An ordinary scrubber is out. Only machines rated from ISO 5 are candidates, such as the Gansow Reinraum or the i-team SAFE-T-BOT 45. The particle count trial still decides.

Decision table by ISO class

RoomWhat the sources supportSource
ISO 8 and 7A scrubber can be approved. One ISO 7 lab runs a standard stand-on twice a week. A filtered, grounded machine is the safer defaultCanadian Space Agency DFL; CHEManager 2012
ISO 6 and 5Only a cleanroom-built machine with a HEPA or ULPA exhaust filterIP Gansow; i-team via Cleanroom Technology
ISO 4 and cleanerNo scrubber-dryer we found claims itCleanroom Technology 2025 (i-team's ISO 4 product is a vacuum)
ISO 1 to 3Manual cleaningCHEManager 2012
Rooms where microbes are the concernMikroclean does not recommend its machineCHEManager and reinraum.de 2015
Any classThe facility approves from particle counts before, during and afterCHEManager 2012

For the rest of a plant that is not a cleanroom, see our manufacturing plants guide.

What this answer does not cover

This page is about particles. It does not cover sterile or aseptic rooms in drug making. There the worry is microbes, and the site's own cleaning validation sets the rules. Mikroclean does not recommend its scrubber there. It also says the room needs a "closed floor system" for its machine, which we read as a sealed floor with no open joints. It does not cover what an ISO class means for your process. The room's limit is a ceiling, not your target, and your contamination control team owns the counts. The ISO ratings for machines come from their makers. No independent test we could find backs them. If you run disinfectants, see our disinfectant guide for contact time, which a scrubber pass rarely meets.

Frequently asked questions

What makes a floor scrubber cleanroom compatible?

A HEPA (H13) or ULPA filter on the vacuum exhaust, a conductive body grounded to the floor, and drain hoses that open only when you choose. IP Gansow and Mikroclean both use stainless steel for easy wipe-down.

Can a regular auto scrubber go in an ISO 7 cleanroom?

It can if the facility approves it. The Canadian Space Agency's ISO 7 lab scrubs twice a week with an Advance SC1500 stand-on. The approval should rest on particle counts taken in the room.

Can you add a HEPA filter to an ordinary scrubber?

In theory. CHEManager (2012) says the technical work and time make a retrofit not economically justifiable. IP Gansow instead fits its cleanroom kits while the machine is being built.

What is the cleanest room a scrubber-dryer can work in?

ISO Class 5, on the makers' own ratings. IP Gansow rates its Reinraum line from ISO 5, and i-team rates its SAFE-T-BOT 45 at ISO 5. We found no scrubber-dryer rated for ISO 4 or cleaner.

Do cleanroom floor scrubbers need a special cleaner?

They need the cleaner your floor maker and facility approve, mixed exactly. A Wake Forest lab found its particle counts were sensitive to the soap-to-water ratio.

Sources

  • Canadian Space Agency, David Florida Laboratory, Cleanroom and Laboratory Areas cleaning appendix (2017): canadabuys.canada.ca
  • IP Gansow, Reinraum 41 BF 57 and 41 BF 68 cleanroom scrubber-dryers, brochure pages (German): ipcworldwide.com
  • CHEManager, "Maschineneinsatz im Reinraum" (July 18, 2012, German): chemanager-online.com
  • CHEManager, "Scheuersaugmaschine im Reinraum" (April 27, 2015, German): chemanager-online.com
  • reinraum.de, "Cleaning machine for the cleanroom" (March 20, 2015): reinraum.de
  • Cleanroom Technology, "Battery-powered cleanroom floor cleaning range launches for up to ISO Class 4" (March 13, 2025): cleanroomtechnology.com
  • labnetwork mailing list, "cleanroom floor scrubber?" question (August 20, 2025): mtl.mit.edu and Wake Forest reply: mtl.mit.edu
  • Global Industrial, 17 in low speed floor machine 153 (the machine in the labnetwork question): globalindustrial.com
  • IPC, CT15, CT15R, CT30, CT45, CT46 operations manual: ipcworldwide.com
  • Wikipedia, "Cleanroom," ISO 14644-1 class limits and FED-STD-209E equivalents: en.wikipedia.org
  • Wikipedia, "HEPA," EN 1822 filter classes H13 and U15: en.wikipedia.org